FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 1–16 of 310 results
Item Number: DUB2317 This is a pair of Monster 4-40 Thread Ball Links from Dubro. These can be used with pushrods or turnbuckles. FEATURES:Heavy duty Black nylon ball links with pre-installed balls INCLUDES:Two 4-40 ball linksTwo 4-40 x 5 8 caphead machine screwsTwo 4-40 nylon lock nutsTwo brass tapered ball standoffs SPECIFICATIONS:Total ball link length:…
Item Number: DUB2133 This is a 2mm Swivel Ball Link Set with Hardware FEATURES:Brass, plastic, & steel construction INCLUDES:Two swivel ball links w 2mm self-threading shank (25mm long)Two 2mmx12mm socket head cap screws (black)Two 2mm nuts (Silver)Two beveled spacers 2mmx4.7mmx2mm (ID x OD x thickness) (brass) REQUIREMENTS:1.5mm allen wrench for socket head cap screws4mm wrench…
Item Number: DUB2247Color: YELLOW These are Body Klip Retainers from Dubro. These work with any electric or nitro vehicles. FEATURES:Yellow rubber retainerSteel body clips INCLUDES:Two yellow retainersEight body clipsInstructions COMMENTS:The body clips are attached to the yellow strap. The yellow strap mounts to the the hood of the vehicle. This is so when you remove…
Item Number: DUB2315 This is a pair of Monster 6-32 Thread Ball Links from Dubro. These can be used with pushrods or turnbuckles. FEATURES:Heavy duty black nylon ball links with pre-installed balls INCLUDES:Two 6-32 ball linksTwo 6-32 x 5 8 caphead machine screwsTwo 6-32 nylon lock nutsTwo brass tapered ball standoffs SPECIFICATIONS:Total ball link length:…
Item Number: MIP12140 This is a pair of optional MIP 12mm Keyed Hex Adapters. FEATURES:Hardened CNC machined steel constructionFor use with the MIP X-Duty CVD kit for Traxxas vehicles INCLUDES:Two 12mm Keyed Hex Adapters with two 3x3mm Set Screws
Item Number: TRA08106 This is the optional MIP C-CVD for theTraxxas Slash, Nitro Rustler and Nitro Stampede Vehicles. FEATURES:Steel construction INCLUDES:Two C-CVD BonesTwo AxlesTwo Outdrive CupsTwo Capture RingsTwo Drive PinsTwo Cross PinsTwo CouplingsTwo 4mm Lock NutsFour 6-32×1 8 Set ScrewsMIP Decal SheetInstruction sheet SPECIFICATIONS:Length: 79mm (3 )Shaft Diameter: 4.5mm (0.18 )
Item Number: RRP08115 This is the optional MIP C-CVD Outdrive Cup for use on the Traxxas Slash, Rustler and Stampede Vehicles. FEATURES:Steel construction INCLUDES:One C-CVD Outdrive CupTwo 3x3mm Set Screws
Item Number: MIP10144 This is an optional 3 16 CVD Rebuild Kit from MIP. FEATURES:Steel construction INCLUDES:Two capture ringsTwo pinsTwo couplingsTwo 2.5×2.5mm set screws
Item Number: MIP9168 This is an optional MIP CVD Spline Kitfor use on the 1 10 scale Traxxas Summit. FEATURES:Steel constructionBlack in color INCLUDES:Four couplingsTwo male spline bonesTwo female spline bonesTwo drive hubsTwo axlesFour pinsTwo 4.5mm locknutsFour 3x4mm set screwsFour 4×4.5mm set screws
Item number: TRA2075 This is the Digital High Torque Servo for the Traxxas E-Revo RTR and the Traxxas Slash FEATURES:Plastic blue three piece waterproof case INCLUDES:One Digital High Torque Servo with J style connector SPECIFICATIONS:Length: 41mm (1.6 )Width: 20mm (0.79 )Height: 42.3mm (1.67 )Torque: 125 oz-inSpeed: 0.16 sec @ 60°
Item Number: TRA4685 These are replacement slipper friction pegs for TRAXXAS kits thathave a slipper peg clutch. FEATURES:Made of RULON INCLUDES:Twelve pegs SPECIFICATIONS:length – 3.5mmdiameter – 3mm COMMENTS:Can be re or black in color,These pegs go in the holes on the side of the spur gear.
Item Number: TRA2785 This is the stock replacement rear shock shaft. Includes: 2- Chrome plated Rear shock shafts.
Item Number: TRA7018 These are the Pushrods for use on theTraxxas 1 16 Slash VXL 4WD RTR FEATURES:Nylon constructionRed in color INCLUDES:Four PushrodsEight Hollow Balls SPECIFICATIONS:Length: 55mm (2.2 )Diameter: 5.2mm (0.20 )
Item Number: TRA6856X This is the optional 17mm Short Wheel Hub Set for the Traxxas Slash 4×4. FEATURES:Hubs and wheel nuts constructed of aluminum, anodized blue in colorSteel hub retainers and axle pinsAllows the use of wheels with 17mm hex INCLUDES:Four each Wheel Hubs, Wheel Nuts, Hub Retainers and Axle Pins
Item Number: TRA2019 This is the Traxxas 27mHz Two Channel AM Receiver Without BEC. FEATURES:Replaces damaged receivers.Mounting tabs on either side insure secure attachment to chassis. INCLUDES:One Two Channel Receiver Without BEC. REQUIREMENTS:Mounting to chassis with two 3mm x 12mm round head machine screwsCrystal SPECIFICATIONS:Length: 2.24 (57mm)Width: 1.42 (36mm)Height: 0.75 (19mm)
End of content
End of content
No products in the cart.
